Built from Reynolds 631 Oversize tubing & Fork Blades. Cast Long Point lugs & BJ top eyes on the seat stays, cast bottom bracket shell & crown. Cast Horizontal dropouts are also fitted with double eyes front & rear. (Rear Dropout spacing is 130mm as standard, 135mm available on request).
This frame is built to fit Cantilever or `V` brakes which allows a 700-32 tyre(MAX) with mudguards to be fitted.
- Fitted with Lever bosses on the down tube (for down tube levers,available with down tube adjusters instead of lever bosses on request) & cable eyes on lower headtube (for STI`s, Ergos & bar end shifters)
- 3 sets of bottle fittings,
- Rack eyes fitted to the seat stays & lowrider fittings on the fork blades
- Pump pip behind headtube
- Chain hook
- 2 slotted stops on side of the top tube for rear brake cable.
- Crown, brake & chainstay bridges are tapped for mudguard fitting.
- Columns are 1″ Threaded as standard or in “A” head 1″ Or 1 1/8″ on request.
Size:-18.5”-25.5” in half inch increases(All sizes centre to top) – Larger Sizes On Special Request
Tyre sizes subject to manufacturers tolerances.
Frame shown is for Illustration Only and not shown in New Oversize Spec.
Frame Shown here with optional paint upgrade of coloured headtube (£26.00) & Multi-panel Seat tube (£45.00).
If you require any further help or advise please contact us.
Telephone: 0113 2551144